INVERTERS

INVERTERS

TECHNICAL DATA

iP5A Series – Fan & Pump Specialized VFDs

Three-phase | 5.5 to 450 kW

Key Features

• Specialized functions for fan and pump applications:

  • Advanced PID control (Pre-PID, Dual PID)
  • Multi-motor control for up to 4 motors (5.5–90 kW [7.5–125 HP])

• Energy-saving and high-efficiency features:

  • Sleep & Wake-up function for load-based operation
  • Flying start for seamless motor re-acceleration
  • Automatic energy-saving function
  • Flux braking algorithm for efficient deceleration

• Enhanced protection functions:

  • Pre-heater function to prevent condensation
  • Low leakage PWM for reduced electrical noise
  • Safety stop function
  • Automatic carrier frequency adjustment

Control and Performance

• Selectable V/f and sensorless vector control
• Long-life capacitors and simplified framework for durability and reliability
• Easy Start function for quick commissioning
• Selectable PNP/NPN input signals for flexible system integration
• Plug-in type control terminals for convenient wiring
• Cooling fan On/Off control for extended life and energy efficiency

Communication and Integration

• Built-in RS485 communication (LS Bus)
• Optional communication boards:
  • Modbus RTU, DeviceNet, Profibus-DP, LonWorks, BACnet, Modbus TCP

Software & Monitoring

• PC-based monitoring and commissioning software: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

iH Series – Robust, Dual-Rated High-Power VFDs

Three-phase | 30 to 220 kW

Key Features

• Space Vector PWM technology for optimized motor control
• Dual rating: Constant torque / Variable torque for a wide range of applications
• Low noise operation enabled by high-performance DSP and IGBT technology
• Precise torque calculation using current control for high-torque performance
• High starting torque: 150% for demanding load conditions
• Slip compensation for consistent speed under variable loads
• Flying start (recovery from momentary power failure) for smooth restarts
• Carrier frequency: 2 – 10 kHz adjustable for application-specific noise and performance balance

Control & Interface Features

• 4–20 mA analog output for monitoring and control integration
• 2-line, 32-character LCD display as standard for easy parameter viewing
• Built-in process PI control for accurate regulation

Software & Monitoring

• PC-based monitoring and commissioning tool: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

iG5A Series – User-Friendly, Compact VFDs

Single & Three-phase | 0.4 to 22 kW

Key Features

• Space Vector Control technology for optimized motor performance
• V/f (Volts per Hertz) control (PWM by IGBT) for reliable and simple motor operation
• High torque output: 150% torque at 0.5 Hz for demanding applications
• Carrier frequency: 1 – 10 kHz
• Trip-free operation algorithm to ensure stable performance under fluctuating loads
• Automatic and manual torque boost for startup and dynamic load conditions
• 8 preset speeds for flexible process control
• Built-in process PID controller for accurate system regulation

Integrated Functionalities

• Built-in braking IGBT for effective dynamic braking
• Integrated Modbus / RS485 communication for easy system integration
• Selectable PNP/NPN input signals for versatile wiring options

Control Interface

• 4-digit detachable display (keypad) for user-friendly operation and monitoring
• Parameter upload & download for quick setup and duplication

INVERTERS

INVERTERS

TECHNICAL DATA

iG5 Series – User-Friendly, Compact VFDs

Single & Three-phase | 0.4 to 4 kW

Key Features

• Space Vector Control technology for smooth and efficient motor operation
• V/f control (PWM by IGBT) for simple speed control
• High torque output: 150% torque at 0.5 Hz
• Carrier frequency: 1 – 10 kHz
• Trip-free operation algorithm for stable performance under varying loads
• Auto and manual torque boost for optimized startup and performance
• 8 preset speeds for flexible operation
• Built-in process PID control for precise system regulation

Built-in Functionalities

• Integrated braking IGBT for fast stopping
• Built-in Modbus / RS485 communication for seamless integration
• Selectable PNP/NPN input signals for system compatibility

Control Interface

• 4-digit detachable keypad display for easy setup and operation
• Parameter upload & download for fast and consistent configuration

INVERTERS

INVERTERS

TECHNICAL DATA

iC5 Series – Compact, User-Friendly Micro VFDs

Single-phase | 0.4 to 2.2 kW

Key Features

• Compact micro-size VFDs for simple and efficient motor control
• Built-in EMC filter (Class A) – optional
• Selectable control modes:
  • V/f control
  • Sensorless vector control
• Motor parameter auto-tuning for optimal performance
• High torque output: 150% torque at 0.5 Hz
• Frequency output range: 0.1 – 400 Hz
• Carrier frequency: 1 – 15 kHz
• Analog input: 0–10 V DC
• Protection degree: IP20 enclosure

Control & Performance Features

• Selectable manual/automatic torque boost
• Built-in potentiometer for easy speed adjustment
• Selectable PNP/NPN input signals for versatile integration
• Fault history log: Records last 5 faults
• Enhanced PID process control for precise regulation
• Up-Down & 3-Wire operation modes
• Optional Modbus RTU communication for system integration
• 8 programmable I/O points for flexible control applications

Software & Accessories

• Parameter copy unit for fast setup and duplication
• PC-based monitoring and commissioning software: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

iE5 Series – Compact, User-Friendly Micro VFDs

Single-phase | 0.1 to 0.4 kW

Key Features

• V/f control for simple and reliable motor operation
• Ultra-compact size:
  • Dimensions: 68 × 128 × 85 mm (2.7 × 5 × 3.3 in)
• Frequency output range: 0.1 – 200 Hz
• Carrier frequency: 1 – 10 kHz
• Fault history log: Records last 3 faults for quick diagnostics
• Protection degree: IP20 enclosure for standard indoor applications
• Built-in RS485 communication (LS Bus / Modbus RTU) as an option

Control & Performance Functions

• DC injection braking for controlled stopping
• Selectable manual/automatic torque boost for optimized startup
• Selectable PNP/NPN input signals for flexible system integration
• PI (Proportional-Integral) control for process regulation
• Up-Down & 3-Wire operation modes
• Automatic restart after instantaneous power failures
• Built-in potentiometer for easy speed adjustment

Software & Accessories

• Monitoring and commissioning PC software: Drive View
• Parameter copy unit for quick and easy configuration replication

INVERTERS

INVERTERS

TECHNICAL DATA

LSMV Series – Medium Voltage Drives for Energy Efficiency

Three-phase | 140 to 9,130 kW

Perfect Energy-Saving Medium Voltage Drive

Key Features

• Multi-Level Pulse Width Modulation (PWM) Technology:

  • More sinusoidal output waveform, eliminating the need for output filters
  • Low input current THD, fully compliant with IEEE standards

• Compact Design:

  • Optimized internal layout through thermal analysis to maximize space efficiency

• High Efficiency & Energy Saving:

  • Efficiency and power factor above 95%, without compensation devices
  • No input/output filters required, achieving perfect energy-saving VFD system

• Redundant Cell Power Factor Control:

  • No additional cost for low power factor correction
  • Advanced voltage regulation and stable high power factor maintained across the entire speed range using standard induction motors (above 95%)

• Built-in Cell Bypass Function:

  • In case of cell failure during operation, the faulty cell is bypassed automatically or manually
  • After bypass, the system can still deliver 83% of the rated voltage
  • Neutral point shifting ensures continued operation with constant drag torque, even with a bypassed cell

INVERTERS

INVERTERS

TECHNICAL DATA

iV5L Series – High-Duty Full Flux Vector Control VFDs

Three-phase | 2.2 to 375 kW

Ultimate Performance Solution for System Drive

Key Features

• Advanced speed and torque control:
  • Up to 200% instantaneous torque, maximum 250%
  • Precise speed and position synchronization for high-performance applications
• Static motor parameter auto-tuning for optimal motor control
• Comprehensive PID control options: Draw, Droop, Process PID
• Highly precise control with optional Sincos encoder
• Synchronous motor sensorless control for SPM and IPM motors

Specialized Functions for Demanding Applications

• Load balance function for multi-motor synchronization
• Diameter calculation / Taper function for winding and unwinding processes
• Splicing and inertia compensation function for seamless process transitions
• Quick stop function for enhanced safety and control

Mechanical & Built-in Features

• Built-in dynamic braking transistor (2.2–22 kW [3–30 HP]) for effective braking
• User-friendly LCD keypad, detachable for remote operation
• Plug-in type control terminals for easy installation and maintenance

Optional Extension Boards

• Elevator I/O board (EL I/O) for elevator-specific applications
• Encoder division board (open collector type)
• Synchronization option board for speed and position control
• Sincos encoder interface for high-precision feedback

Optional Communication Boards

• RS485 (LS Bus / Modbus RTU)
• Profibus-DP
• DeviceNet

Software & Monitoring

• PC-based monitoring and commissioning software: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

iS7 Series – High-Performance Dual-Rated VFDs

Three-phase | 0.75 to 375 kW

Key Features

• Dual rating: Constant torque / Variable torque
• Selectable control modes:
  • V/f (Voltage/Frequency)
  • V/f PG (with pulse generator feedback)
  • Sensorless vector control
  • Sensored vector control
• High-speed processing: 150 MIPS (Million Instructions Per Second) DSP for fast and accurate control

Advanced Functions & Performance

• Droop control for automatic torque balance in multi-motor systems
• KEB (Kinetic Energy Buffering) protection
• Ride Through (LV Trip Delay) protection
• Under Load Trip protection
• PMSM sensorless vector function for Permanent Magnet Synchronous Motors
• Power brake & Flux brake functions for enhanced braking performance
• Static motor parameter auto-tuning for optimal motor matching

Ease of Use & Flexibility

• Easy Start Mode for fast setup
• User & Macro group for customized parameter sets
• Multi-Function Key for quick access to essential functions
• Second motor control and independent parameter set (sensorless)

Mechanical & Built-in Features

• Available IP54 enclosure (0.75–22 kW [1–30 HP]) as a built-in option
• Built-in RS485 communication (LS Bus / Modbus RTU)
• Built-in dynamic braking transistor (0.75–22 kW [1–30 HP])
• Optional built-in EMC Filter and DC Reactor:
  • EMC Filter (0.75–22 kW [1–30 HP])
  • DC Reactor (0.75–220 kW [1–215 HP])

Control & User Interface

• Wide graphic LCD keypad, supporting 6 languages for intuitive operation
• Extension I/O boards (optional): up to 11 inputs and 6 outputs
• Optional PLC board (Master-K platform): up to 14 inputs and 7 outputs

Optional Communication Boards

• Profibus-DP
• DeviceNet
• Modbus TCP
• Rnet
• LonWorks
• CANopen

Software & Monitoring

• PC-based monitoring and commissioning software: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

H100 Series – Fan, Pump & Compressor Specialized VFDs

Three-phase | 0.75 to 500 kW

Key Features

• Specialized control functions for fan, pump, and compressor applications:
  • Advanced PID control (including Pre-PID, Dual PID, etc.)
  • Multi-motor control: control up to 8 motors simultaneously
• Energy-saving and high-efficiency functions:
  • Sleep & Wake-up operation for energy optimization
  • Flying start for smooth re-acceleration of rotating motors
  • Automatic energy-saving function
  • Flux braking algorithm for enhanced control

Advanced Protection and Reliability

• Pre-heater function to prevent condensation in idle motors
• Low leakage PWM for reduced electrical noise
• Safety stop function
• Automatic carrier frequency adjustment for optimized performance
• Long-life capacitors and simplified internal design for extended service life
• Easy Start function for simplified commissioning

Mechanical and Installation Features

• Flange type option for external heat sink mounting (outside panel) to reduce panel heat load
• Cooling fan On/Off control for energy savings and extended fan life

Monitoring and Control Interface

• Wide graphic LCD keypad dedicated for HVAC applications, with Hand/Auto keys
• Selectable PNP/NPN input signals
• Time Event operation with real-time clock (RTC)

Built-in Components

• EMC filter for reduced electromagnetic interference
• DC reactor (above 30 kW) to improve power factor and reduce THD
• RS485 communication supporting:
  • LS Bus, Modbus RTU, Metasys N2, BACnet MS/TP
• USB port for direct PC communication

Optional Communication Boards

• EtherNet/IP
• Modbus TCP
• LonWorks
• RAPIEnet+

Software Tools

• PC-based monitoring and commissioning software: Drive View