INVERTERS

INVERTERS

TECHNICAL DATA

H100 Series – Fan, Pump & Compressor Specialized VFDs

Three-phase | 0.75 to 500 kW

Key Features

• Specialized control functions for fan, pump, and compressor applications:
  • Advanced PID control (including Pre-PID, Dual PID, etc.)
  • Multi-motor control: control up to 8 motors simultaneously
• Energy-saving and high-efficiency functions:
  • Sleep & Wake-up operation for energy optimization
  • Flying start for smooth re-acceleration of rotating motors
  • Automatic energy-saving function
  • Flux braking algorithm for enhanced control

Advanced Protection and Reliability

• Pre-heater function to prevent condensation in idle motors
• Low leakage PWM for reduced electrical noise
• Safety stop function
• Automatic carrier frequency adjustment for optimized performance
• Long-life capacitors and simplified internal design for extended service life
• Easy Start function for simplified commissioning

Mechanical and Installation Features

• Flange type option for external heat sink mounting (outside panel) to reduce panel heat load
• Cooling fan On/Off control for energy savings and extended fan life

Monitoring and Control Interface

• Wide graphic LCD keypad dedicated for HVAC applications, with Hand/Auto keys
• Selectable PNP/NPN input signals
• Time Event operation with real-time clock (RTC)

Built-in Components

• EMC filter for reduced electromagnetic interference
• DC reactor (above 30 kW) to improve power factor and reduce THD
• RS485 communication supporting:
  • LS Bus, Modbus RTU, Metasys N2, BACnet MS/TP
• USB port for direct PC communication

Optional Communication Boards

• EtherNet/IP
• Modbus TCP
• LonWorks
• RAPIEnet+

Software Tools

• PC-based monitoring and commissioning software: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

S100 Series – Compact, High-Performance Dual-Rated VFDs

Single & Three-phase | 0.4 to 75 kW

Key Features

• Frequency output range: 0.1 – 400 Hz
• Carrier frequency: 1 – 15 kHz
• Dual rating: Constant torque / Variable torque operation
• Selectable V/f and sensorless vector control for flexible motor control
• High torque performance across the entire speed range
• Fault history log: Stores last 5 faults for quick diagnostics
• Advanced functions for demanding applications:
  • KEB (Kinetic Energy Buffering) protection
  • Ride Through (LV Trip Delay) protection
  • Under Load Trip protection
  • Power brake & Flux Brake functions
  • Static motor parameter auto-tuning

Process Control and Efficiency

• Enhanced PID process control with Sleep & Wake-up energy-saving functions
• Low leakage PWM algorithm for reduced leakage current
• Cooling fan On/Off control with easy fan replacement

Mechanical and Installation Features

• IP66 enclosure available (0.4 – 22 kW) as a built-in option for harsh environments
• Built-in dynamic braking transistor (0.75 – 22 kW)
• Optional built-in EMC filter & DC reactor for improved performance and compliance
• Wide graphic LCD keypad (30 – 75 kW)
• Remote operation via external wide graphic LCD keypad

Control and I/O Options

• Extension I/O boards (optional): up to 11 inputs and 6 outputs
• Analog inputs:
  • 0–10 V DC
  • ±10 V DC
• Selectable PNP/NPN input signals
• Built-in RS485 communication (LS Bus / Modbus RTU)
• Optional communication boards:
  • Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen

Software Tools

• PC-based monitoring and commissioning software: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

G100 Series – Compact Sensorless Vector Control VFDs

Three-phase | 0.1 to 22 kW

Key Features

• Selectable V/f and sensorless vector control for optimized motor performance
• Motor parameter auto-tuning for easy setup and precision control
• High torque performance across the entire speed range
• Frequency output range: 0.1 – 400 Hz
• Carrier frequency: 1 – 15 kHz
• Input voltage margin: -15% to +10% for voltage fluctuation tolerance
• Fault history log: Records last 5 faults for quick diagnostics
• Analog input options:
  • 0–10 V DC
  • ±10 V DC
• Protection degree: IP20 enclosure, UL Type 1 (optional)
• Selectable manual/automatic torque boost
• Selectable PNP/NPN input signals
• Second motor control and independent parameter set
• Built-in dynamic braking transistor as standard
• Built-in EMC filter for reduced electromagnetic interference
• Enhanced PID process control
• Integrated RS485 communication (LS Bus / Modbus RTU)
• Optional fieldbus communication:
  • EtherNet/IP, Profibus-DP, CANopen
• Built-in potentiometer for manual speed control
• Cooling fan on/off control for energy savings and easy fan replacement
• Remote control via external keypad (optional) with RJ45 cable
• Advanced functions:
  • Sleep & Wake-up modes for energy efficiency
  • KEB (Kinetic Energy Buffering) protection for stable operation during power dips
  • Low leakage PWM algorithm for reduced leakage current
• PC-based monitoring and commissioning software: Drive View

INVERTERS

INVERTERS

TECHNICAL DATA

M100 Series – Compact Single-Phase VFDs

Single-phase | 0.4 to 2.2 kW

Key Features

• User-friendly, micro-size, slim design VFDs for space-constrained installations
• Built-in EMC filter – C2 class compliant
• Frequency output range: 0.1 – 400 Hz
• Carrier frequency: 1 – 15 kHz
• Analog inputs:
  • 0–10 V DC analog input
  • Optional second analog input: 0–10 V DC / 4–20 mA
• Analog output: 0–10 V DC
• Protection degree: IP20 enclosure
• Selectable manual/automatic torque boost for optimal control
• Built-in potentiometer for easy speed adjustment
• Selectable PNP/NPN input signals for flexible integration
• Fault history log: Stores last 5 faults for diagnostics
• Enhanced PID process control
• Up-Down & 3-Wire operation modes
• Optional Modbus RTU communication for network integration
• Parameter copy unit for quick duplication of settings
• Optional PC-based monitoring & commissioning software tool for easy setup

INVERTERS

INVERTERS

TECHNICAL DATA

AFE Series – Low Harmonic / Regenerative Drives

Three-phase | 55 to 4,000 kW

Key Features

• Top-end efficiency:
  • LV-LH / LV-RG at 97% efficiency for maximum energy savings
• Low harmonic distortion:
  • THDi < 5%, ensuring minimal impact on the power supply network
• Wide power range:
  • Up to 4 MW, voltage range 380–690 V
• Fully enclosed IP54 cabinet solution for robust industrial environments
• 100% interchangeable, self-monitored PEBB power modules, enhancing serviceability and reliability
• Project-specific adaptation to meet custom application requirements
• Compact liquid-cooled version available (in-built) for space-saving installations
• State-of-the-art liquid cooling system for high-efficiency thermal management

Cooling Options

• Water-to-water heat exchanger
• Water-to-air heat exchanger
• DNV Marine approval for liquid-cooled systems, ensuring compliance in marine applications

Additional Options

• C/D configurations, including WiFi and Bluetooth wireless communication for easy monitoring and control